GUS Daily Digest Mon, 14 Mar 94 9:37 PST Volume 11: Issue 38 Today's Topics: 16-bit daughter-board and sampling DOOM & GUS Gabriel Knight and GUS Good text-to-speech program? GUS & SB with games GUS0041, where is it? GUS Daily Digest V11 #36 GUS Daily Digest V11 #37 (2 msgs) High freqs fading? Hired GUNS How to use bank 1, 2, 3 etc INDY CAR & Sonic sound card.... SB AWE32 Sound Blaster Compatibility needed? Subsription Thanks Phat v3.7 Guses Standard Info: - Meta-info about the GUS can be found at the end of the Digest. - Before you ask a question, please READ THE FAQ. ---------------------------------------------------------------------- Date: Mon, 14 Mar 94 12:09:47 GMT From: a3_clark@csd.uwe.ac.uk (A Clark) Subject: 16-bit daughter-board and sampling Just thought I'd add my say about this talk about 1Meg on the GUS not being enough. If most programs for the GUS use the Software Developement Kit supplied by Gravis, or implement the methods used in this kit, then the 1Meg DRAM that's on-board won't actually be used for sampling. The main reason for this is that DMA transfer operates at a much higher rate than 44.1kHz and so the sample should, ideally, be transferred directly into main memory. Thus the only restriction to sampling is how much memory the program can access at this speed. This will depend on the efficiency of the programs use of high memory, i.e. wether it can use Extended memory directly (as in windows) or the time wasted transferring a chunk of main memory into extended memory. I hope everything I've stated here is correct, otherwise I'll be grossly shown-up! a3_clark@uk.ac.uwe.csd (Sorry, no fancy banners under my name!) ------------------------------ Date: Mon, 14 Mar 94 09:45 WET From: violator@io.org (Violator) Subject: DOOM & GUS B00000000000000 I have found the 3D effects in DOOM very useful, especially when playing in Modem-VS mode. It might help if you turn off the music, so you can hear WHERE the sound is coming from exactly. Playing my friend, who has a SBPro, I have a clear advantage over him because I can HEAR exactly which direction he's in, even on large speakers. So for all DOOM players out there... learn to trust the GUS! ------------------------------ Date: Mon, 14 Mar 94 02:10:31 -0500 From: ap641@cleveland.freenet.edu (Hank Leukart) Subject: Gabriel Knight and GUS This has probably been asked before, but I can't find the answer anywhere. Is there a way to get Gabriel Knight: Sins of the Fathers (Sierra On-Line) to work with the GUS in native mode? I tried using the GUS Sierra Drivers, but the game just crashed when I used them. I'm sick of listening to the cheesy Sound Blaster FM on this game. (I have a SB as well as a GUS) Thanks in advance... -Hank Leukart -- **** ** *** *** ** **** : CALL OF THE | Hank Leukart * * * * * * * * * * * : SHADOWS | (ap641@cleveland.freenet.edu) **** **** *** * * * **** :Apogee//Cygnus| "Official" DOOM FAQ Writer * * * * * * ** * * : March | FAQ via E-mail or ftp.uwp.edu ------------------------------ Date: Sat, 12 Mar 1994 13:37:32 -0500 From: Alexander Chislenko Subject: Good text-to-speech program? I am trying to use GUSTALKR for reading texts (first call SBOS -o2, then GUSTALKR). It's *very* difficult to figure out the text, because if both primitive speech generation and the primitive set of pronunciation rules SAY program seems to have. Is there anything better out there? Alex. ------------------------------ Date: Mon, 14 Mar 94 09:43:43 +0000 From: "|\/|artin" Subject: GUS & SB with games Hi all, I've seen numerous suggestions/reasons for buying a SB and plugging it in alongside my Gus, however, I have a query on this: If I did the above, how would it work for those games that use 1 card for music and another for effects. For example there is a game that I play (can't remember the name of the game) where I load the megaem s/w, and have the game set up as Roland for music, and SB for effects/voice. If I were to install a real SB in my machine, would I have to stop loading megaem? Your curiously, |\/| -- +----------------------------------------------------------------------------+ | |\/|artin |/\|ard | email: martin@wyvern.bri.hp.com Tel: +44 272 228 142 | | | HPDesk: Martin WARD/HPC655 Fax: +44 272 236 169 | +--------martin%wyvern.bri.hp.com%hplb.hpl.hp.com%uucp-gw-1.pa.dec.com-------+ |Support Systems Europe, Filton Road, Stoke Gifford, Bristol, AVON, BS12 6QZ.| +----------------------------------------------------------------------------+ ------------------------------ Date: Sun, 13 Mar 1994 15:00:31 +0200 (EET) From: Otto T Hyvarinen Subject: GUS0041, where is it? As a new owner of Ultrasound looking for upgrades: Where is GUS0041?? I tried wuarchive.wustl.edu, archive.epas.utoronto.ca and garbo.uwasa.fi today and couldn't find anything! FAQ says the newest version of Ultramid is 2.06, but all I could find was 1.05. Please tell me what I did wrong! -- " Miehen mitta miehen varsi ei ole miehen mielt{ p{{ss{ << Otto Hyv{rinen, miel on viety, p{{ j{tetty ohyvarin@kruuna.helsinki.fi >> aivot otsasta otettu. " ------------------------------ Date: Mon, 14 Mar 1994 10:17:12 -0500 (EST) From: Bryon Thur Subject: Re: GUS Daily Digest V11 #36 Just a quick question. I've been playing Police Quest 4 with relative amounts of success. A friend recently told me that Sierra has made available a GUS patch kit that contains a bunch of new sounds for unse exclusively with the GUS...can someone tell me what this file is called, and where I can find it? Thanx in advance. Bryon Thur bhthur@watarts.uwaterloo.ca ------------------------------ Date: Sat, 12 Mar 1994 18:31:24 -0500 (EST) From: Phat H Tran Subject: Re: GUS Daily Digest V11 #37 > Date: Sat, 12 Mar 1994 11:48:27 -0400 (EDT) > From: LFG3397@ritvax.isc.rit.edu > Subject: 1/2 of MIDI! > > I had loaded the new Windows drivers into my computer and just like everyone > else nolonger had MIDI in Windows. However, I then downloaded the most recent > version of the Ultrasnd.ini. into the Ultrasnd Directory. But now I only have > half of the MIDI patches in Windows, I think onle the percussion patches. > How do I get all of the patches and full MIDI function? Something's still not right with your ultrasnd.ini file if this is the case. Grab gus0041.zip, delete ultrasnd.ini from your \ultrasnd directory, and install. > Date: Fri, 11 Mar 94 19:15:30 EST > From: jdimich@ajiant.dnet.dupont.com > Subject: Doom Freezing In Between Games > > To the avid Doom players: > > My problem lays not when I try and get GUS music going, but in between the > game. Actually, it happens quite often in the middle of a game, Doom will just > freeze up on me. I have my GUS set up as SET ULTRASND=220,6,6,7,5 and all of The only possible problem I see is the use of IRQ 7 for the GF1 IRQ. Use IRQ 5 instead (the SB/MIDI IRQ can be 7 -- it's not that critical). DOOM 1.2 does have some lock-up problems with the GUS. There's not much you can do about them except wait for 1.3 or go back to 1.1. TSRs and memory managers might contribute to your problems, so try clean booting. Phat. ------------------------------ Date: Mon, 14 Mar 1994 10:29:05 -0600 From: Mike Surgeon Subject: Re: GUS Daily Digest V11 #37 >Date: Fri, 11 Mar 1994 10:45:46 -0700 >From: Tam Ignatius Ying S >Subject: anyone tried this? > >HI all, > >I've never seen this posted to the news, I think >its really fun. In case u haven't read csip.games.action, >try modifying Doom's default.cfg file. You can see a line >with snd_channels (something like that), change it to a large >number, say 10, 20 and see what happens to Doom. > >Sounds great, eh? > >- Ignatius > I tried this the other night, bumped up the number of sounds from 4 to 8. The number of simultaneous sounds increased (adds to the game's realism), and I couldn't notice any slowdown. Just another indication that GUS is THE soundcard for DOOM. Mike Surgeon >Date: Fri, 11 Mar 94 19:15:30 EST >From: jdimich@ajiant.dnet.dupont.com >Subject: Doom Freezing In Between Games > > To the avid Doom players: > > My problem lays not when I try and get GUS music going, but in between the >game. Actually, it happens quite often in the middle of a game, Doom will just >freeze up on me. I have my GUS set up as SET ULTRASND=220,6,6,7,5 and all of >the music and sound effects sound great! Can anyone give me some insight on my >problem? I am running on a 486/66 with no autoexec.bat or config.sys as well >as a limited selection of TSR's and drivers. I have even tried lowering my >CLK/6 (the highest) to a CLK/3 (the lowest). Anyone? > These seems to be a problem with version 1.2 only. I have none of these problems with version 0.99. I got the 1.2 upgrade and was just about to order when I realized there was a serious problem with this version and the GUS. Is there a fix coming from ID? I am itching to order so I can play the other episodes. Mike Surgeon ------------------------------ Date: Sat, 12 Mar 1994 12:41:21 -0800 (PST) From: Juan Carlos Leon Subject: High freqs fading? Hi, I just got a PAS16Basic to replace an old SB 2.0 which has been working with my GUS 2.2 for so many time. The sound quality of the GUS was far better than the SB 2.0. But now playing some WAVs or MODs files I've found the PAS sounding better than the GUS, crisppier and clearer. The GUS seemed to have a roll off on the high frequencies and this is very notorious when you're playing the same file with both cards at the same time. Is this a problem with my GUS or it's just like that? Have anybody of you compared your GUS with a PAS? I hope it's only a matter of replacing the output capacitors/filters of my GUS' line-out. Thanks for any help. Juan Leon. -- email: jleon@scf.usc.edu *-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-* Major in Electrical Engineering, Computers | --****-- | University of Southern California | | Los Angeles, CA. USA *-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-* ------------------------------ Date: Sun, 13 Mar 1994 20:53:51 +0000 (GMT) From: Toby Subject: Hired GUNS Ok I don't know if you folks are in the UK. I was interested in hearing HIred Guns so I went down to the shop and guess wot? No GUS support. Adlib SB, Roland. No GUS no 3d. I did not buy it. Also the review in PCFormat made no mention of the GUS. Strange that. # | \ / ~~|~~ /~~~\ ! ! {} ............................ | # * < \ /\ / /~\ | | |---| /\ {} Pessimism? It'll never work. > * # | \/ \/ \_/ | \___/ ! ! /~~\ {} ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | # ------------------------------ Date: Sat, 12 Mar 94 21:13:00 GMT From: rhofboer@knoware.nl (Rogier Hofboer) Subject: How to use bank 1, 2, 3 etc >To: gus-sdk@mail.orst.edu >From: rhofboer@knoware.nl (Rogier Hofboer) >Subject: How to use bank 1, 2, 3 etc >Cc: >Bcc: >X-Attachments: > >>To: gus-music@mail.orst.edu >>From: rhofboer@knoware.nl (Rogier Hofboer) >>Subject: How to use bank 1, 2, 3 etc >>Cc: >>Bcc: >>X-Attachments: >> >>When I have installed more banks than only Bank 0, >>I can't get to them. When I change banks in Cakewalk, or Recording Session >>I keep getting Bank 0. >> >>I've installed the bank properly, because emixer.exe recognizes it and >>can load the patches from it. Back in my music program I can't access them >> >>The Patchmanager also doesn't support more Banks. So maybe the current >>GUS-drivers don't support this. >> >>Hmm funny, I can make samples with Gus (not the best but it is possible) >>..Stil waiting for the 16-Bit board.... >>I can make patches out of them (even multisampled) with Patchmaker, >>and now I can't use them (or I'll have to replace existing patches) >> >>The best thing would be a Patchmanager that shows all the instrument numbers, >>when you click on one of them you get a file-list-box and you can walk to >>the Dirs to find the .PAT file you want to load on that instrument number, >>click on it and the loading is done. A database in wich you can store loaded >>configurations is also something that would be nice then. >> >>For Patch-Caching apps, there has to be a list with all the .PAT files with >>the intrument numbers -> The ULTRASND.INI file. Since I'm making >>house, swing-beat and rap music. I can't always use the GM-patches. >>So I can't use patch-caching apps. >> >>If someone is can make this sort of patch-manager >>It would be really really nice. (I don't know how to do it) >>Cubase Windows doesn't support Patch-Caching yet :-))) and I like that program >>most. But before I buy it I want to have it all work. >> >>I think also that in the future (more people want the patchmanager described above) there has to be a Patchmanager like it is now. And >>the one above described. Windows-Midi Programs also must have a >>option to switch the patch-caching on and off. >> >>Okay, there are people longing for Patch-Caching-Aware-Apps, I want to get >>rid of this method, and want to use my GUS as a MIDI sampler and not as >>a GM module. >> >>Greetings, Rogier >> > ------------------------------------------------------------------------- internet : rhofboer@knoware.nl fidonet : Rogier Hofboer @ 2:512/34 adress : Boschstraat 11 zip-code : 6921 MB city : Duiven country : Netherlands tel : +31-(0)8367-65202 fax : +31-(0)8367-66446 ------------------------------------------------------------------------- ------------------------------ Date: Sat, 12 Mar 1994 14:09:00 GMT From: thomas@hammer.hacktic.nl (Thomas van Kuipers) Subject: INDY CAR & Sonic sound card.... Does anyone have the AIL drivers for Sonic Sound card.... You enjoy the company of other people. <--------------------------------------------------------------------> Thomas van Kuipers Email: thomas@hammer.hacktic.nl De Wadden 49 Examenyear of HighSchool (6 VWO) 3524 AG Utrecht Important: Computers, Math, Women and Music! Telephone: +31 30 884235 Netherlands (in Europe) <--------------------------------------------------------------------> ------------------------------ Date: Sat, 12 Mar 94 17:09:57 -0500 From: liaor@churchst.ccs.itd.umich.edu Subject: Re: SB AWE32 Only 1meg of ROM? Are you SURE? Does that mean CL went through the trouble of putting on an EMU synthesizer chip with on-board effects, but there are simply only lousy compressed waveforms to synthesize? I would think that the MIDI engine has at least 4megabytes ROM, like the Kalix Soundtrax, SCC1, Waveblaster, etc. If Kalix ever gets their Soundtrax card shipping, it will be interesting to see which product wins. CL is an industry standard, regardless of how good/poor their technical merits are. Kalix's features are in some ways similar to the SB AWE32 (on board effects, DSP...from Kalix's literature it looks like the Kalix's DSP capability outstrips CL's ASP), powerful MIDI engine. I think that these cards aren't for gamers. The recording capabilities and ability to make custom patches seem geared more to musicians than gamers. ------------------------------ Date: Mon, 14 Mar 1994 10:25:53 -0600 From: Don Eller Subject: Sound Blaster Compatibility needed? I've seen the complaints about soundblaster compatibility of GUS beaten to death by following the digest for almost a year now. I agree totally with the opinion of Neal Stougton in his response to Shannon Miller's request that Gravis build a 100% compatible Sound Blaster daughtercard for the GUS. a) The Soundblaster Basic (the old Sound Blaster Pro w/o midi cable and seq. software) was advertised for $59 in my Sunday Best Buy ad. I don't see how Gravis could build a daughtercard that would be cheaper or more compatible than this! b) The Gus expansion connector can only take on add-on option. Currently Gravis offers two daughtercards that will consume this connector, the CD-Rom adapter(s) and the 16-bit recording card. I realized this too late when I purchased the CD-Rom adapter for my Misumi CD-Rom drive, now I find I can't use the 16 Bit recording card, without sacrificing my CD-Rom adapter. Myself, I find that soundblaster emulation is becoming less and less important everyday (with megaem and AIL drivers and native support, which all sound much better than a soundblaster anyway). And contrary to what I've read in the digest, Sbos usually can perform the job if you have to resort to it. But for those who don't feel they can sleep at night without absolute confidence they have 100% Soundblaster compatibility, I think getting a Soundblaster Basic for $59 from Best Buy is the ultimate answer. If you don't have a Best Buy in your area, I believe they will sell mail order and I seem to remember they even have a 1-800 number. I'd even be willing to buy a card for someone and ship it to them if they paid $10 for my effort and shipping costs, just so the whining about Soundblaster compatibility would go away. Didn't most people buy the GUS because it sounds better than the SoundBlaster? ------------------------------ Date: Mon, 14 Mar 1994 22:04:45 +1000 (EST) From: "Marshall / John Leonard (ISE)" Subject: Subsription I hope I've got it right this time! I wanted to subscribe to the GUS daily digest. Do I just ask here? If so, please sign me up! BTW, where does one get hold of the latest GUS-FAQ? ------------------------------ Date: Sun, 13 Mar 1994 21:05:49 +0000 (GMT) From: Toby Subject: Thanks Phat Thanks a lot for your comments but your suggestion concerning ultrajoy does not make sense. You say "the new ultrajoy in the GUS0041 file fixes the problem" Well the whole point of the post was to tell people that they DONT WORK!!!! The new ultrajoy does NOT fix it. I do not have the old ultrajoy, gus0041 wrote the new ultrajoy over the top of it! But never mind. It all works fine for me now. Your comments regarding my suggestions to other users is fair enough. You were lucky that yours worked. Mine did not and maybe there are others out there who will have problems. Using my suggested method, You can garantee there will be no problem. With just letting install do it's job there may be problems. It is up to you GUS users what you do. # | \ / ~~|~~ /~~~\ ! ! {} ............................ | # * < \ /\ / /~\ | | |---| /\ {} Pessimism? It'll never work. > * # | \/ \/ \_/ | \___/ ! ! /~~\ {} ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ | # ----------------------------- End of forwarded message 1 ------------------------------ Date: Sun, 13 Mar 1994 20:35:26 +0800 (WST) From: Roderick Nasir DAVID Subject: v3.7 Guses We just got the new 3.7 GUSes here in Perth, and I am very impressed with the all the Software in em?! The come with the 3.1 rev disks and 2 bonus disks with Epic Pinball and Wavelite on them. All in all, about 8 disks all together! I must say, then installation 'now' is very easy. I remember when I got my v2.2 GUS and all I had in there was the blue 720k disks! Things have surely changed and I think they've got it right now. And, it was VERY easy to install. I watched a 'non-guser' install one herself and setup the whole thing up and even use Megaem!! (and GOT IT too work?!) Well, it amazes me what reading the manual can do? *grin* Anyways, hats off Gravis!! Nasir. -- * Seeya on the Groove Train! | "When you get somewhere......You're there" * * _+-_|\ | Buckaroo Banzai. * * / \ | Nasir David at the... * * Perth , W.A ----> +_.--._/ | University Of Western Australia. * ------------------------------ Date: Sun, 13 Mar 1994 10:34:36 -0500 From: ab507@freenet.carleton.ca (Rod Woolley) gus-general-request@mail.orst.edu -- <<<<<<<>>>>>>>>>>>>>>>>>>> <<<<<<<>>>>>>>>>>>>>>> ------------------------------ End of GUS Daily Digest V11 #38 *******************************